MVE466 System Board
Introduction
Chapter 4: Technical Reference:
This
section covers some of the major aspects of
the
design, as well as pin
a s s i g n m e n t s a n d c o m p a t i b i l i t y a n d
benchmark information.
Appendix A: System Planning Worksheet
Appendix B: Upgrade Order information
Contents:
Section 2
This section covers the Myiex BIOS installed
on your MVE486. it is broken down into five
chapters.
Chapter 1: BIOS Overview
provides an
overview of the Mylex system BIOS and
describes its features.
Chapter 2: BIOS Setup
describes how to
use the setup program to configure your
system board.
Chapter 3: BIOS Diagnostics
describes
how to diagnose common problems you may
have when setting up your system.
Appendix A: Error Messages
Appendix B: CMOS Hard Drive Table
What You Will Need
Before you begin to
the MVE486 in a chassis,
the following tools will be required: A Phillips and fiat
blade screwdriver, plastic stand-offs (these are nor-
mally supplied with the chassis) and assorted screws.
l - 6
Version DO1
Copyright 1993
