Mylex FlashPoint BT-930, Installation Manual And User'S Manual

Page: 28 / 70

Adapter Configuration
3-2 FlashPoint™ LT BT-930 User’s Manual
Figure 3-1. AutoSCSI Adapter Selection
☛
Note
When you exit AutoSCSI after making configuration
changes, the system prompts you to reset your system.
The reboot allows changes to the configuration to
become operational.
The Legend at the bottom of the screen show you what keys are enabled for
the window.
Adapter Configuration
1. Highlight the adapter you want to configure. Use the arrow keys to
move up and down the selection list when more than one adapter is
installed in the system.
2. Press <Enter>. The configuration selection dialog box opens on the
display.
3. Select Adapter Configuration and press <Enter>.