Mylex FlashPoint BT-930, Installation Manual And User'S Manual

Page: 18 / 70

Installing Your FlashPoint
2-4 FlashPoint™ LT BT-930 User’s Manual
work properly. To overcome this problem, the
FlashPoint adapters provide an AutoSCSI option to
disable onboard termination.
Installing Your FlashPoint
Step 1: Prepare the host system and the adapter
When you are ready to begin, power down the host system.
Referring to your host system owner’s manual, remove the covers to open
the case to gain access to the motherboard and expansion slots as shown in
Figure 2-1.
If the computer has been on, wait a few minutes until the power supply case
has cooled down inside the computer. If the power supply case is cold, touch
it to discharge any static electricity that may be on your clothes or body.
Figure 2-1. Remove the Cover and Bracket
To install the adapter card, remove the mounting screw and the existing
bracket from the rear panel behind the selected PCI slot.