Mylex FlashPoint BT-930, Installation Manual And User'S Manual

Page: 15 / 70

Manual No. 3000863 2-1
Chapter 2
Installation
This section details hardware installation. See Chapter 3 for information on
using AutoSCSI to configure adapter operating parameters.
What’s Covered in This Section
1. Unpacking the adapter and preparing for installation
2. Installing your FlashPoint
3. Configuring and cabling internal SCSI devices
4. Configuring and cabling external SCSI devices
5. Powering up the system
6. Hard drive set up
Unpacking
Before handling the FlashPoint, take precautions to avoid damage from
electrostatic discharge: either use a grounding strap, or, touch your a metal
part of your computer chassis to discharge static electricity before handling
the board. Always hold the board by the edges, even after static electricity is
discharged.
1. Check that your shipment is complete with cables, documentation and
diskette.
2. Remove the board from its protective envelope.
3. Verify that no physical damage occurred during shipping by inspecting
the board for bent pins, loose parts, broken traces, and chipped or
broken connectors.