Mylex DAC960PG Installation Manual Download Page 49

Page: 49 / 106

Manual No. 771971

3-1

Chapter 3

Installation

Installation Overview

This chapter describes the installation of the DAC960PG PCI to Ultra-SCSI
RAID controller hardware and the proper connection and configuration of its
attached SCSI devices

Requirements

The following items are required to perform the installation:

• DAC960PG PCI to Ultra-SCSI RAID controller with memory

installed

• Host system with an available PCI slot

• Configuration & Utilities diskette containing the DACCF utility

• SCSI cable(s) to interconnect the controller and the drives/devices

• Narrow or Wide; and Standard, Fast, or Ultra-SCSI compliant disk

drives

• SCSI termination device(s) as required

Refer to the Configuration & Utilities diskette file DISKLIST.TXT for a list
of disk drives and other devices that are compatible with the DAC960PG.

Optional Requirements

The following optional items also may be required, depending on your
application or the type of installation:

• SCSI cable to interconnect the controller and external devices

• Battery back-up option for controller cache memory

Summary of Contents for DAC960PG











































































































Search results

Summary of Contents for DAC960PG

Reviews:

Related manuals for DAC960PG

Brands by name

Popular brands

Mylex DAC960PG, Installation Manual

Search results

Summary of Contents for DAC960PG

Reviews:

Related manuals for DAC960PG

Brands by name

Popular brands