www.hygienesuppliesdirect.com
Caution:
Never open the trigger when making adjustments on the air cap.
Adjusting the spray gun:
Choice of spraying effects
A = vertical flat jet -
for horizontal surfaces
B = horizontal jet - f
or vertical surfaces.
C = round jet - f
or corners, edges and other hard to reach areas.
Adjusting the amount of material:
Adjust the amount of material by turning the adjustment screw.
+ turn to the right
- more material
- turn to the left
- less material
Spraying technique:
The spraying result depends considerably on how smooth and clean the
surface is before spraying begins. For this reason the surface should be
carefully prepared and kept free from dust.
Surfaces not to be sprayed should be covered with sticky tape and
newspaper.
It is advisable to carry out a trial spraying onto cardboard or a similar
surface to find the most suitable spray gun adjustments.
12
MYESG01_Paint_sprayer_Manual 22/12/16 08:56 Page 12
