Warning! Please choose correct installation area,
always check to ensure there is
no wiring, pipe work, etc. in the area to be drilled.
A
．
Place the hanging rack on the wall as a guide ruler (please make sure the holes
are at parallel level), use a pen to mark the hole positions
B
．
Drill holes in the wall with
ɸ
10mm drill bit and insert the plastic wall plugs
C
．
Fasten the hanging rack on the wall with the screws, making sure the hanging
rack is in correct direction
D
．
Gently insert the bottom of the heater first to the bottom of the hanging rack
and then gently push the top heater body onto the top hanging rack
E
．
Secure the heater into place with the screws provided.
Warning: Before plugging in the unit make sure the radiator is properly
secured to the wall. This will avoid future problems.
Unit Description:
1.
Front cover
2.
Towel bracket
3.
Control panel
4.
On/off switch
1
2
3
1
2
3
4
4
