3. The screen displays
for hour setting, press
to choose either Comfort
mode
or ECO mode
or press so neither the Comfort or ECO lights show
so the heater will be in anti-frost mode. Press
to move to the next hour to set or
to the previous hour to set, choosing Comfort mode
, ECO mode
or
show no lights for the unit to operate in anti-frost mode in this hour, repeat this
process up to hour 23, after setting hour 23, press
to revert back to the current
day and press
again to move to the next day to be set.
4. Repeat the operation until you have completed the schedule of every hour and
every day.
5. When the last day is programmed
, press
again to revert to
.
6. Your settings are then saved and can be adjusted at any time to suit your needs by
simply following these instructions again.
7. The temperature can be set to your needs by simply pressing the
or
button at any time whilst the unit is in operation.
Open window function:
Press
and
button together, the screen displays
, then it comes back to
display target temp after 3 seconds (if there is timer, display remaining time), which
means that the open windows function is ready. When the item is heating, the
detected room temp drops rapidly over 2 degrees in 2 minutes, open window
function would be activated, while the screen would display
and flash. The
item stops heating.
To exit open windows function, press
to return the working mode when open
windows function was activated then screen stop flashing
,or wait 20 minutes to
automatically come back to previous working mode, or press
to enter the
standby condition, the open window function would be reset when the item is turned
on again
To turn off open windows function completely: Press
and
button together,
the screen displays
, then it comes back to display target temp after 3 seconds
