Control Panel:
1. Standby indicator
2.Heating indicator
3. Comfort mode indicator
4. ECO mode indicator
5. LED display
6. Standby button
7. Mode button
8. Increase button
9. Decrease button
10. Timer button
Operation
The unit must be installed by a qualified electrician.
1.
Plug or Spur the appliance to AC 230V 50-60Hz socket. Verify the rated
current of the power socket whether it fits the requirements and equipped with a
safety grounding device.
2.
Press the on/off switch at the right bottom corner, you will hear a sound which
indicates the unit is in standby, the standby indicator is illuminated.
3.
Press standby button
to start the heater. For the first use the heater is in
default settings as shown below: (If default settings are different, it will simply
because the unit has been quality tested after production).
Comfort mode
Target temperature setting: 22 °C
Day: 1(Monday), Time: 00:00 (Off)
Window open function: Off
Timer: Off
Note:
Please note: If the unit is in standby mode the unit will keep the clock and day
settings. Depending how long the unit is switched off at the mains or unplugged, the
clock and day may need to be reset when powered back up.
3
4
5
6
7
8
9
10
1
2
