Preparations
Mounting MYIRO-9 on Auto Sheet Feeder FD-A09
• If the Paper Guide is attached to the MYIRO-9, remove it before proceeding. See p. 15.
1
Unplug all cords and cables (AC adapter power cord, USB cable, LAN cable) from the MYIRO-9.
2
While holding the cover of the MYIRO-9 closed, tilt the MYIRO-9
back so that it rests on its back side.
3
Push down on the tab of the Auto Sheet Feeder connector cover,
pull the cover open, and remove it.
• Please store the cover carefully so that it will not be lost or broken.
4
Return the MYIRO-9 to the normal upright orientation.
5
Place the Auto Sheet Feeder FD-A09 on a flat surface.
6
Lift the MYIRO-9 up, align the Auto Sheet Feeder alignment
holes on the bottom of the MYIRO-9 with the alignment pegs on
the Auto Sheet Feeder, and slowly lower the MYIRO-9 straight
down onto the Auto Sheet Feeder until it clicks in place.
18
