www.myirtech.com
MYD-Y6ULX
|
Product Manual
16
Switch
BIT1
BIT2
SD Card
ON
ON
eMMC
OFF
OFF
Table 4.2 eMMC Version Boot Configure
Bit3 and Bit4 are used to select boot type, please refer the setting as below,
Switch
Boot TYPE
BIT4
BIT3
ON
ON
Boot From Fuses
ON
OFF
Serial Downloader
OFF
ON
Internal Boot
OFF
OFF
Reserved
Table 4.3 Boot Type Configure
4.2.3 Ethernet
MYB-Y6ULX is equipped with two ethernets operating at 10/100 Mbps, which offering
standard RJ45 connector (With voltage transformer inside the socket). MYC-Y6ULX has
Integrated a PHY chips (Microchips, LAN8720A). The ethernet 1 circuit on base board has
been greatly simplified by using the PHY.Proper protection circuit can be added when
customer developing your own base board.
Please refer to the SCH of the Ethernet1 of base board as below.
Summary of Contents for MYD-Y6ULX Linux
Page 1: ...www myirtech com MYD Y6ULX Product Manual 1 MYD Y6ULX Product Manual Version 1 0 08 Nov 2017...
Page 29: ...www myirtech com MYD Y6ULX Product Manual 29 Figure 4 23 Expansion Interface...
Page 33: ...www myirtech com MYD Y6ULX Product Manual 33 Figure 6 2 Mechanical Information of MYB Y6ULX...
