3.1.2 Assemble methods
a) Lift main machine up from below, instead of forcibly pulling it out by holding the hanger.
b) As shown Figure 3.1.2.1, put the hand piece onto the hanger.
c) Show as figure 3.1.2.2,connect the foot switch to the corresponding socket
“
FOOT
SWITCH
”
behind main frame,push up the blue switch and connect the power line.
Figure 3.1.2.2
Figure 3.1.2.3
3.2 Operation procedure and interface introduction
3.2.1 Power on
For the sake of safety, please do in steps.Firstly, make sure power socket is well earthed,and
then make sure the plug is well inserted in the power supply socket.Turn on the key switch
on the front board.
Foot switch connector
Power connector
Power Switch