manualshive.com logo in svg

mychway HR-OF808, User Manual, Page: 17 / 19

Share
Download
mychway HR-OF808 User Manual Download Page 17

7.7.2.4

7.8 Cold water, hot water system defect alarm
In case of cold or hot water system defect alarm shown on screen, it means water flows too
slowly or water temperature is too high which is not up to working condition standard. In
this case, it is forbidden to use laser probe head. Restart machine. Watch carefully if alarm
appear again. If alarm appears, please contact with us.
7.9 Filtration system and ion removal system replacement for HALF A YEAR in the normal
operation situation.
If alarm appears or fix maintenance is required, please contact with original supplier.
7.10 Probe head surface overheating alarm
It probe head surface overheating alarm appears, it will disappear after one to two minutes.
If the alarm could not disappear, restart machine. If alarm still appears, you could contact
with us.
7.11 Laser device overheating alarm
It laser device overheating alarm appears, please stop using for more than five minutes.
Even after alarm disappears, probe head can not keep using, but restart machine first. If
there is no alarm, you can continue to use machine. But if alarm still appears, you could
contact with us.

Water Level

Inlet / Outlet

Overflow

Summary of Contents for HR-OF808




















Reviews:

No comments