background image

UNPACKING

INSTRUCTIONS FOR USE

• 

For best results, your battery tool should be charged in a location where the temperature is 

 

more than 50°F (10˚C) but less than 104˚F (40˚C). Do not store outside or in vehicles.

• 

NOTE: Work light contains a strong magnet in stand-up base. Do not set work light on or   

 

near computer equipment, computer disks or other types of magnetic storage or equipment. 

 

Magnetic fields can erase data.

• 

Do not attempt to change the batteries as this will void the limited warranty.

• 

Do not attempt to alter or change the LED bulbs as this will void the limited warranty.

• WARNING:

 Read, understand and follow all printed material provided with or on this device. 

 

Do not leave light energized or unattended, do not lay light face down. Keep out of the reach 

 

of children. Only use charging devices provided by the manufacturer. Do not over charge the 

 

battery. Do not store device for extended periods of time. Charge every 3 months during 

 

storage. Do not use in wet conditions as it is not waterproof.

This product has been shipped completely assembled.

• 

Carefully remove the tool and any accessories from the box. Make sure that the light and both 

 

chargers are included.

• 

Inspect the tool carefully to make sure no breakage or damage occurred during shipping.

• 

Do not discard the packing material until you have carefully inspected and satisfactorily 

 

operated the tool.

• 

Please check light for damage or cracks before using as this can cause the product to fail or 

 

injure the user.

• 

Charge the battery completely before using for the first time.

• 

The MEK light has two modes: 
o High 
o Low

• 

To switch work light to High, press button above the tripod to the “I” position.

• 

To switch work light to Low, press button above the tripod to the “II” position.

• 

To switch work light OFF, press button above the tripod to the “O” position.

• 

Ensure light is securely attached with hook or stable on tripod before working under unit to 

 

prevent injury or damage.

• 

Collapse the three legs to use in handheld mode.

• 

Fully extend the three legs to use in standing mode.

Summary of Contents for 52602
















Reviews: