MyBinding TB220, Instruction Manual, Page: 6 / 17

5
Figure 4 Figure 5
TB220
GB
THERMAL BINDER
MALFUNCTION
DISPOSING OF THE MACHINE:
Dispose of the machine in an envi-
ronmentally sound fashion at the
end of its usefull service life. Do not
dispose of any of the parts included
in the machine or its packing with
household trash.
SPECIAL ACCESSOIRES
Description Order-No.
XXXXX
x
xxxx
Note: For orders of special accessoires and spare parts, please contact your dealer.
TECHNICAL DATA
Power supply / Voltage:
230 V 50/60 Hz 250 W
Max. binding width: A4
Max. binding thickness:
24 mm (220 sheets 80 g)
Preheating time: 1–2 min.
Time for binding: 1-6 mm (1 min); 8–12 mm (2 min); 15–24 mm (3 min)
Binding temperature:
165 +- 10 °C
Binding range: 1–24 mm
Net Weight :
0,86 kg
Dimensions (L*W*H) : 420 x 90 x 170 mm
3. Put the documents into the in-throat and be-
gin to bind.
Note:
Make sure the thermal cover cling
enough to heating board.
If you are binding a thick document, you may
bind the document several times continu-
ously. The machine can be used for binding
max. 3 times.
The machine is ready for binding after the
1 st buzz.
The machine will be buzzing again every one
minute to indicate when you can take out the
document for cooling down.
Time for binding:
1–6 mm thermal cover needs 1 minute;
8–12 mm thermal cover needs 2 minutes;
15–24 mm thermal cover needs 3 minutes.
-
-
-
4. Place the document and the thermal cover on
the Cooling rack for cooling down.
Note:
Please don’t touch the inside part
because of the high temperature.
Note:
Please turn off the machine on
time after finishing binding. And
also the machine will be power
off automatically after 5 minutes
stand by.