* Do not Overload (exceed the capacity) of the scale including the weight of any trays or bowls combined with
objects you may be weighing. Overload or Dropping/shocking the scale will damage the sensor and void your
warranty.
* Allow sufficient warm up time. Turn the scale On and wait several seconds to give the internal components a
chance to stabilize before weighing.
* The cleaner the environment the better. Dust, dirt, moisture, vibration, air currents and proximity to other
electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.
* Handle with care. Gently apply all items to be weighed onto tray top. Although this scale is designed to be quite
durable, avoid rough treatment as this may permanently damage the internal sensor and void your warranty.
* Avoid lengthy exposure to extreme heat or cold, your scale works best when operated and stored at normal room
temperature. Allow the unit to acclimate to any major temperature change for at least one hour before use.
*Place the item to be weighed on the platform, after the stable weight is displayed remove the item immediately.
This will prolong the longevity and accuracy of this weighing instrument..
.** Do not operate near an in-use cell phone, cordless phone, radio, computer or other electronic device. These
devices emit RF and can cause unstable scale readings. If your scale ever performs poorly, try moving the scale to
a different room or location. This is a very precise scale - the display may seem to wander or jump when weighing.
This is due to air currents or vibrations. Stable weighing is achieved when the display remains fixed for 3 seconds.
OPERATION_____________________________________________
If your scale ever performs slowly, inaccurately, or shows the battery icon please replace the batteries.
Battery Operation:
1) Three “AAA” size Heavy Duty or Alkaline batteries are required.
2) To install batteries:
a) Release the battery cover by sliding the locks in-wards.
b) Place batteries into battery compartment aligned correctly.
c) Replace battery cover and lock it.
DO NOT USE EXCESSIVE FORCE AND DO NOT PRESS ON THE TRAY
3) The scale is now ready for battery operation.
*Remove the batteries if you plan to store the scale for longer then 14 days
CALIBRATION__________________________________________
Important: Always perform calibration procedure after first turning the unit on and allowing it to warm up and
stabilize for 20 seconds. Calibrate your scale at regular intervals if the scale is subject to weather or altitude
changes or if the display shows Out2. Incorrect calibration can occur if you do not follow the steps exactly. If your
scale does not perform accurately, please also try replacing your batteries. You will need a 100gram weight to
calibrate this scale. NOTE: if you do not have access to a 100g weight you can purchase one at your local store or
in emergency situations you can use 100g of coins or weights (ie 20 US Nickels = 100g) as a 100g weight.
Calibration Procedure:
1) Turn the scale ON
2) Press and hold the MODE/CAL key for 3~5 seconds until the display shows CAL
3) Press the MODE/CAL key again, the display will flash CAL and then 100.0
4) Place a 100g weight on the tray, the display will show PASS and then 100.0, Calibration is complete.
NOTE: if after calibration your scale does not read accurately, this indicates calibration error and the calibration
process should be repeated more slowly. Please calibrate on your scalepad, mousepad or similar surface if
possible.
FEATURES____________________________________________