ENG
17
www.my-junior.com
5. Seat unit functions
(figure 9,10)
The deep seat unit contains an adjustable canopy which can be
fold by pressing button 1.
By pulling the stripe (2) you can change the angle of the backrest.
Also make sure the backrest has locked properly.
Attention:
To transport the child in the seatunit
grasp the handles do not lift the canopy.
In the lower part of the seatunit there is a mechanism allowing
the seatunit to swing after being removed from the frame. In
case you do not want allow the seatunit to swing pull the four
levers out from the seatunit as depicted in picture (10).
6.Seat unit functions
(figure 11)
The seatunit contains an adjustable back as well as footrest.
The former can be adjusted by pressing lever (1) and pull or
push the backrest to the desired position and again releasing
the lever.
By pressing levers (2) on both sides as depicted in figure 11 we
can adjust the footrest.
To release the guardrail press (3).
Attention:
This seatunit is not suited for infants below
the age of six months.
7. Brakes
(figure 12)
To lock brakes, push brake lever down.
To unlock brakes, lift brake lever up.
Attention:
This stroller is designed to be pushed
at a normal walking speed. This is not a jogging or
skating stroller.
figure 9
figure 10
figure 11
figure 12
1
2
3
1
1
2