15
TROUBLESHOOTING
If any trouble occurs while you are using the device, please check the
following lists first.
Low atomisation
Low battery power
Replace the batteries or use
the power adapter
Stains on the electrode cause
a faulty connection
Use alcohol to clean
electrodes
The mesh holes are clogged
Refer to cleaning and
disinfection procedure to clean
the medication cup
The mesh is broken
Replace the medication cup
After switching on, the
power indicator is not on
and no mist comes out.
The batteries are inserted in
the wrong direction
Follow (+) and (-) marks on
the battery cover and re-insert
the batteries in the correct
direction
Batteries are flat
Replace the batteries or use
the power adapter
Faulty connection between
battery and main unit
Check and reconnect the
power adapter to the nebuliser
unit
After switching on, the
power indicator is on,
but no atomisation.
The medication cup is not
installed properly
Refer to set up the
medication procedure to
re-install the medication cup.
The mesh holes are clogged
Refer to cleaning and
disinfection procedure to clean
the medication cup
The mesh is broken
Replace the medication cup
Power indicator is
constantly orange
Low battery power
Replace the batteries or use
the power adapter
Power indicator is flashing
orange
Faulty connection of
electrode and main unit
Use alcohol to clean
electrodes and re-install the
medication cup
The mesh is broken
Replace the medication cup
1. If the device does not nebulise normally after taking the
above-mentioned procedure, please contact the store where
you purchased the device or the nearest dealer.
2. Never operate this device if any of the parts are not working
properly or have been damaged.
User Manual.indd 15
2020/03/30 16:17
