42
EN
M1.2.CUT45HF.NLFREN 09102018
5�2 Periodic check
WARNING!
Periodic check should be carried out by qualified professionals to ensure safety. The power
of the switching box and the cutting machine should be shut down before periodic check
to avoid personal injury accidents such as electric shock and burns� Due to the discharge of
capacitors, checking should be carried out 5 minutes after the machine is powered off�
Tips:
Safety
All maintenance and checking should be carried out after the power is completely cut off. Make
sure the power plug of the machine is pulled out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the moving parts such
as the fan to avoid personal injury or machine damage.
Periodic check
Check periodically whether inner circuit connection is in good condition (especially plugs).
Tighten the loose connection. If there is oxidization, remove it with sandpaper and then reconnect.
Check periodically whether the insulating layer of all cables is in good condition. If there is any
dilapidation, rewrap it or replace it.
Beware of static
In order to protect the semiconductor components and PCBs from the static damage, please
wear antistatic device or touch the metal part of the enclosure to remove static in advance before
contacting the conductors and PCBs of the machine internal wiring.
Keep it dry
Avoid rain, water and vapour infiltrating the machine. If there is, dry it and check the insulation
of the cutting machine (including that between the connections and that between the connection
and the enclosure) with an ohmmeter. Only when there are no abnormal phenomena anymore,
can the machine be used.
Put the machine into the original packing in dry location if it is not to be used for a long time.
Pay attention to maintenance
Periodic check should be carried out to ensure the long-term normal use of the machine. Be
careful when doing the periodic check, including the inspection and cleaning of the machine
interior.
Generally, periodic check should be carried out every 6 months, and it should be carried out
every 3 months if the cutting environment is dusty or with heavy oily smoke.
Beware of corrosion
Please clean the plastic parts with neutral detergent.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
14
4. MAINTENANCE
WARNING
Periodic check should be carried out by qualified professionals to ensure safety.
Thepower of the switching box and the cutting machine should be shut down
before periodic check to avoid personal injury accidents such as electric shock
and burns. Due to the discharge of capacitors, checking should be carried out
5 minutes after the machine is powered off.
4.2 Periodic check
Tips:
All maintenance and checking should be carry out after the power is
completely cut off. Make sure the power plug of the machine is pulled
out before uncovering the cutting machine.
When the machine is powered on, keep hands, hair and tools away from the
moving parts such as the fan to avoid personal injury or machine damage.
Avoid rain, water and vapor infiltrating the machine. If there is, dry it and check
the insulation of the cutting machine (including that between the connections
and that between the connection and the enclosure) with an ohmmeter. Only
when there are no abnormal phenomena anymore, can the machine be used.
Put the machine into the original packing in dry location if it is not to be used
for a long time.
Generally, periodic check should be carried out every 6 months, and it should
be carried out every 3 months if the cutting environment is dusty or with heavy
oily smoke.
copyrighted
document
- all
rights
reserved
by
FBC
