33
EN
M1.2.CUT45HF.NLFREN 09102018
2�2 Composition of the cutting machine system
第
一
章
产
品
概
述
3
1.4 Composition and configuration of the cutting machine system
1
)
Composition
Figure 1-3
:
Composition of the cutting machine system
2 Configuration
)
Table 1-3
:
Configuration of CUT40
(
L202
)
Table 1-4
:
Configuration of CUT40C
(
L203
)
Cutting machine
1. GENERAL
DESCRIPTION
CUT40
(
L202
)
300A-6mm
²
-KDP16D
(
3m
)
LT50
Name
Specification
Quantity pcs
(
)
Remark
Material code
Cutting torch
Earth clamp
Operator’s manual
L2030A SC/A0
Standard configuration
Standard configuration
Standard configuration
Standard configuration
10048700
10003276
10048735
10048725
1
1
1
1
Cutting machine
CUT40
(
L203
)
C
300A-6mm
²
-KDP16D
(
3m
)
PT40
-
S
Name
Specification
Quantity pcs
(
)
Remark
Material code
Cutting torch
Earth clamp
Operator’s manual
L2030A SC/A0
Standard configuration
Standard configuration
Standard configuration
Standard configuration
10047859
10003276
10048736
10048725
1
1
1
1
Composition:
• Cutting machine
• Cutting torch
• Earth clamp
2�3 Functions and characteristics of the cutting machine
CUT45HF is an ultra-portable plasma cutting system suitable for a variety of application requirements. It can be used in
handheld cutting and robot cutting as well. CUT45HF can cut conductive metal, such as low carbon steel, stainless steel
and aluminium. The cutting thickness can reach up to 25.4 mm and perforating thickness can reach up to 12 mm.
Advanced digital control mode
Plasma cutting machine CUT45HF adopts international leading MUC intelligent digital control technology, and all its
major parts are performed through software. It is a digital control plasma cutting machine, improved a lot in its function
and performance when compared with the traditional plasma cutting machine.
Advanced inverter technology
The machine adopts switching power supply inverter technology, greatly reducing the volume and weight of the plasma
cutter, and obviously enhancing the conversion efficiency. Switching frequency is beyond audiorange, which almost
eliminates the noise pollution.
Good consistency and stable performance
Generally speaking, for a cutting machine with analogue circuit control or with analogue circuit & digital circuit control,
the performance characteristics are decided by the parameters of various components. Cutting performance of the
machines differ as a result of the inconsistent parameters of the components, so even for the cutting machines of the
same brand, their parameters often differ from each other. In addition, cutting performance of the machine may change
on some extent, since parameters of the components may vary according to the environment such as temperature and
humidity, etc.
One of the characteristics of digital control is that it is not sensitive to the change of parameters; the performance of
cutting machine will not be affected by the change of the parameters of certain parts. Therefore, the consistency and
stability of digital control cutter is better than that of traditional cutter.
copyrighted
document
- all
rights
reserved
by
FBC
