20
EN
M1.3.BT200-BT200M.NLFREN 13112018
WARNING!
This instruction manual is important for the machine, please read carefully before installation and use. Also it is
important for safe use and machine maintenance of machine. Please keep this manual properly in order to further
maintenance of the machine.
1 Introduction
Application range
The tyre changer is especially designed for demounting / mounting tyres from wheel rims.
Caution
Please use the machine only for purpose for which it is designed, don’t use it for other purposes.
Manufacturer shall not be liable for any damage or injury caused by failure to comply with these regulations.
Safety regulation
Use of this machine is especially reserved to trained and qualified professional persons, those who already read the
introduction manual carefully, or someone have the experience for operating similar machinery. Any changes and beyond the
scope of use on this machine without manufacturer’s permission or do not according to the manual, may cause the malfunction
and damage to machine, manufacturer can cancel warranty coverage for above. If some parts are damaged due to some
reason, please replace them according to the spare parts list.
Contents
1 Introduction ......................................................................................................................................................... 20
2 Safety warning labels ........................................................................................................................................... 21
3 Technical data ..................................................................................................................................................... 21
4 Transport ............................................................................................................................................................. 22
5 Unpacking and inspection ..................................................................................................................................... 22
6 Workplace requirements ....................................................................................................................................... 22
7 Position and installation ......................................................................................................................................... 22
8 Electrical and pneumatic connections ...................................................................................................................... 22
9 Adjusting operation .............................................................................................................................................. 23
9.1 Breaking the tyre bead .................................................................................................................................. 23
9.2 Demounting the tyre ...................................................................................................................................... 23
9.3 Mounting the tyre .......................................................................................................................................... 24
10 Helping arm application ..................................................................................................................................... 24
10.1 Helping arm components ............................................................................................................................. 25
10.2 Helping arm operation ................................................................................................................................ 25
11 Inflating the tyre
................................................................................................................................................. 26
12 Moving machine ................................................................................................................................................ 26
13 Maintenance ..................................................................................................................................................... 26
14 Trouble shooting ................................................................................................................................................. 28
15 Spare parts ....................................................................................................................................................... 29
16 Circuit diagram .................................................................................................................................................. 38
17 Pneumatic drawing ............................................................................................................................................. 39
18 EC declaration of conformity ................................................................................................................................ 40
copyrighted
document
- all
rights
reserved
by
FBC
