1
2
Installation Checklist
Important Information : The installation technician should check whether any installation
part has been omitted and follow the check list below to ensure safe and proper installation.
If you have any questions or problems regarding installation, address your queries to the
distributor or dealer. You may also seek information on the company’s website.
■
Does the ice maker work properly?
If the ice maker does not work, check whether the plug has been inserted properly.
■
Did you remove all the packing materials and tapes from the inside of the ice maker?
■
Did you observe the instructions on installation?
■
Did you level the unit?
■
Is the front of the kick plate/grill adequately ventilated?
■
Do you sufficiently understand the operation of the ice maker?
■
Be sure to follow any safety instructions for storing or disposing of an old ice maker.
Remove the door or fix the door firmly if the door is closed. If a child gets inside the ice
maker, and the door is closed, they may get injured.
■
Be sure to observe the following:
Since the product makes use of water, proper water supply and draining are required.
■
Be sure to use the product with a properly functioning floor drain to prevent water leaks.
Leaks may cause electric shock due to m oisture, so make sure that the following a re
always observed:
1. When installing the product indoors, be sure to have a floor drain and make the floor
waterproof, especially if the floor can be damaged due to water leaks.
2. A floor drain must be available at the installation site; be sure to connect the drain hose.
3. Make sure that the floor is sloped so that the leaking water drains away even if the drain
hose gets dislodged or damaged. Install a water overflow prevention wall to prevent
damage.
※
The manufacturer will not be liable for any issue arising from failure to comply with the
above mentioned warnings, dislodged / damaged water supply hose, or inappropriate
drainage.
Notification