7
3. Installation specifications
Fig. 1 Front View
Fig. 2 Side View
Fig. 3 Top View
Space requirements for installation
-
When moving the ice maker, check whether the prepared
opening dimensions,electric rating, and piping position are
correct.
-
Refer to the installation specifications and drawings shown
on pages 9 and 10.
-
Figures 4, 5, 6 and 7 show the entire dimensions of the
product. This product has a gravity drain that requires a drain
hose to run from the drain connector at the back of the
product to an appropriate floor drain.
-
Refer to the specifications shown on pages 9 and 10.
Important Information :
If the ice maker is installed in a
c
orner, the door opening may be limited.
-
The bottom of the ice maker should be leveled.
-
When moving the product using a hand truck or dolly, place
the dolly on the side of the product and shut the door tightly to
avoid possible opening during movement.
The finished bottom should be protected with a suitable
material to avoid possible damage when moving the product
.
Important Information : The provisions of the National
Electric Code as well as any local laws and instructions
should be observed when installing the product.
Notification
85
7
380
752
85
0
376
538
98
625
538
37
27.8
