MuxLab MuxStream 500930, Operation Manual

Page: 26 / 47

MuxStream Camera Operation Manual
26
Image sharpness range is from 0 to 15. The slider
control shows the corresponding numerical value
on the right. Default is 2.
5)
Hue
Image hue range is from 0 to 14. The slider control
shows the corresponding numerical value on the
right. Default is 7.
6)
Flip & Mirror
Enable the Flip button to flip the image horizontally.
Enable the Mirror button to flip the image vertically
(from right to left). Default mode is disabled
(buttons not selected).
7)
Apply/Cancel/Default Button
After adjusting parameters, press the "Apply"
button to save, press the " Cancel" button to cancel
any changes, and press the "Default" button to
recall the default settings.
6.4
Audio Setup (click " Audio ")
1)
Audio Type
Audio type AAC
2)
Sample rate
Sample rate: 44.1K or 48K.
3)
Bit rate
Bit rate: 96K, 128K, or 256K.
4)
Input Type
Line In only.
5)
Input VolL
Set volume of the left channel.
6)
Input VolR
Set volume of the right channel.
7)
ADTS Options
Optional settings: On or Off
8)
Apply/Cancel Button
Press the "Apply" button to save changes, or press
the "Cancel" button to cancel changes.
6.5
System Setting (click " System ")
1)
Work Mode
Work Mode RTSP
2)
Reboot
Click the "Reboot" button for system restart.
3)
User and password
The user can modify the password (characters must
be letters and numbers only).
4)
Apply/Cancel Button
Modify password and click the "Apply" button to
save the new password, or press the "Cancel"
button to cancel password change.
6.6
Network Setting (click " Network ")