MuxLab MuxStream 500930, Operation Manual

Page: 22 / 47

MuxStream Camera Operation Manual
22
http://www.videolan.org/vlc,download and I nstall
the VLC player software. After installation, login
again to obtain the above screen:
5
IP Camera accessed/controlled by WAN
(internet)
5.1
Setup IP Camera for access/control via
dynamic DNS
There are two dynamic DNS available:
Dyndns.org,
3322.org
Router Port Mapping:
Using a router such as the Tenda router, enter
the Router Home Page (interface page), select
"Advanced" => "Virtual Server", and add a new
port number in "Ext Port", add a new port number
in "Int port", set camera IP address to an "Internal
IP", then select "Save", as shown below:
5.2
Dynamic DNS camera access
Set the domain name in the camera, setup the
parameter, then the dynamic DNS can be used to
access the camera. Access link:
http://hostname :port number For example, setup
host computer name: youdomain.f3322.org,
camera port number: 554,Access link should be:
http://youdomain.3322.org:554.
NOTE
！
If the camera port default is 80, then it is not
necessary to input the port number, in this case only
the host name is required to access the camera.
5.3
VLC stream media player monitoring,
see VLC media server procedure
Open VLC media player, click "Media" =>
"Open Network Steam", or click "Ctrl+N"; as
shown below:
Input URL address:
rtsp://ip: port number/1 (First stream);
rtsp://ip: port number/2 (Second stream).