MuxLab 500816 Installation & Operation Manual Download | Manualshive

Page: 12 / 34

background image

8 Button RS232/IR Control Panel

Installation & Operation Manual

12

a unique ID. Once the looped connections are made and the ID is set, we can then set
the control modes with the Control Panel PC Software. For a detailed view of the
looped connections, see Figure 6 below.

Figure 6 Detailed view of looped connects

Note:

Up to 99 programmable control panels can be looped within one system.

However, in order to keep the reaction time for command execution to within a
reasonable time delay, loop no more than 10 programmable Control Panels within a
given grouped system.

System Operation

5.

5.1. USB Driver Installation

The 8 Button RS232/IR Control Panel can be programmed via a computer and either
the USB port or the RS232 port, and running the Control Panel PC Software.

When connecting the programmable Control Panel to a computer using the USB port,
it may be necessary to install the USB driver first. The USB driver for the
programmable Control Panel may be found on the MuxLab Website. Use the
programmable Control Panel driver file to install the USB driver on your computer.

5.2. Software Programming

You can use this Control Panel PC Software to easily set the function of each button
on the programmable Control Panel. The Control Panel PC Software can run directly
without the need to be installed.

After connecting the programmable Control Panel to the computer using the USB or
RS232, run the Control Panel PC Software to program each button function.

First class

Second class

Last class

…

«
...
10
11
12
13
14
...
»

Summary of Contents for 500816



































Reviews:

No comments

Related manuals for 500816

Brand: GE Pages: 2

Brand: XOXO Modular Pages: 13

Brand: Balboa Water Group Pages: 28

ServeRAID M5014

Brand: IBM Pages: 106

Brand: Eaton Pages: 28

Brand: Parallel Pages: 16

Brand: V2 Pages: 46

Brand: Kamstrup Pages: 36

Brand: JFA Electronicos Pages: 29

Brand: Samson Pages: 20

Brand: Universal Remote Pages: 20

EP Series Pro-Bloc

Brand: Parker Pages: 11

Brand: Parker Pages: 22

Brand: Parker Pages: 2

Brand: National Instruments Pages: 17

Brand: Davey Pages: 12

Brand: K&K Pages: 10

MorphoAccess VP MD

Brand: Idemia Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands