8 Button RS232/IR Control Panel
Installation & Operation Manual
26
simply click on one of these actions in the action list and then assign events.
Next we will assign four additional keys to be able to enable the four different
actions, but only one at any given time.
Let’s assign keys5 through 8 for this
purpose. Press on Key5 and select action ty
pe “Press”. Do the same for Key6, 7
and 8. You should now have a screen that looks like Figure 26.
Figure 26
2)
As mentioned in the above step, click on the first Key1 entry in the action (Key1:
Num1) and enter events for that action. Do the same for Key1: Num2, Key1:
Num3, and Key1: Num4. Next assign Key5 through Key8 to select which of the
Key1: Num1 to Key1: Num4 actions are enabled at any given moment. To do so
select (highlight) Key5 in the action list and
in the event section select event “page”
with active # set to 1 (for Num1), see Figure 27. Next do the same for Key6 with
active # set to 2, Key7 with active # set to 3, and Key8 with active # set to 4.
