© MuxLab Inc.
Active VGA Managed Repeater Hub Installation Guide
Page 15
3.6.
Manual Image Control
The image generated by MuxLab’s Active VGA
Managed Repeater Hub may be manually controlled via
the Select button and rocker switch (and their associated
LEDs) located on the Repeater Hub’s front panel
(Figure 6).
Figure 6: Manual Image Control Buttons and LEDs
To adjust the image, the user presses the Select button
until the LED corresponding to the image adjustment
category turns on. There are five categories possible:
(1)
Gain; (2) Sharpness; (3) Red Skew; (4) Green Skew; and
(5) Blue Skew.
Once the user has selected a category, it can be adjusted
by pressing the rocker switch up or down. When
completed, the user can move to the next category by
pressing the Select button again. The Select button
cycles through all five adjustment categories, and the
LED corresponding to the last adjustment made by the
user will remain on.
When making an adjustment, the selected LED will
flicker quickly, but will stop flicking once the minimum
or maximum setting is reached. The rocker switch can
be kept depressed for a faster adjustment.
