© MuxLab Inc .
Passive CCTV Power Integrator Hub Installation
Guide
Page 3
Copyright Notice :
Copyright © 2011 MuxLab Inc. All rights reserved.
Printed in Canada. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise without prior written
permission of the author.
Trademarks :
MuxLab is a registered trademark of MuxLab Inc.
WARNING:
To reduce the risk of fire or electric shock, do not expose the unit
and related equipment to rain or moisture. Assure the peripherals like cameras,
DVR’s, switches, etc., are of type SELV (Safe Extremely Low Voltage).
Particularly the outdoor camera must be of type Integral Isolated Camera
Power. The mentioned equipment must be manufactured and connected in
respect to all local safety codes ensuring that the grounds of adjacent devices
are connected to the same local ground net. This installation should be carried
out by qualified service personnel and should conform to all local safety codes.
CAUTION:
To reduce the risk of electric shock do not open enclosure.
There are no user serviceable parts inside. Refer servicing to
qualified service personnel.
CAUTION:
Passive CCTV Power Integrator Hub is intended to be used in
a RESTRICTED ACCESS LOCATION where equipotential
bonding has been applied, for example, in a
telecommunication center, and which has provision for a
permanently connected PROTECTIVE EARTHING
CONDUCTOR and the installation is provided by a
SERVICE PERSON.
