© MuxLab Inc .
Passive CCTV Power Integrator Hub Installation
Guide
Page 14
3.
Connect a MuxLab passive CCTV Balun (MuxLab
p/n 500000R, 500009, 500022, 500023, 500024 or
500029) to each CCTV camera video output. Please
refer to the appropriate CCTV balun installation
guide for details.
4.
Connect a Cat5e/6 cable from each camera to one of
the modular RJ45 ports on the front of the Passive
CCTV Power Integrator Hub (fig 5). Ensure wiring
is that EIA 568 and straight-through polarity is
respected between the CCTV balun and the hub.
The use of other Cat5e/6 connection hardware such
as patch panels and 110 blocks is supported.
Figure 5: Camera connection
Port Switch Settings:
5.
For each camera port, determine whether video,
power and/or control are to be transmitted via the
same Cat5e/6 cable. If only video is to be
transmitted, then the remote power switch should be
set to “OFF” and the Control terminals may be
disregarded.
