Mutsy Babysitter Instruction Manual Download Page 14

Page: 14 / 28

English

that must be fastened to the rear of the
pushchair insert using a push button.
First release the push button and then
use it to attach the strap to the strap
that is located around the cross con-
nection at the rear of the sitter.

! You must always install the pushchair

insert so that it is facing forwards in
the sitter frame, as shown specified in
diagram 2a.

Assembling the sun canopy or the hood of

the pushchair insert (2c)

· Push the sun canopy or hood into the

rearmost recess in the plastic attach-
ment parts of the pushchair insert
(L+R) until it locks into position.

· To remove the sun canopy or the hood,

push (L+R) on the appropriate locking
mechanism and pull the sun canopy or
hood out of the recesses.

The bumper bar (2c)

·  Fix the bumper bar by placing it in the
  openings in the plastic parts (L+R).
·  Push the button marked “press” (L+R)
  and lift the bumper bar up to remove
  the bumper bar.
!  NB: the bumper bar is not designed to
  carry the sitter.

Removing the seat from the frame (2b)

· To start with you must release the strap,

which is located at the bottom of the
seat, from the sitter frame.

· Push the two release buttons of the uni-

versal fixation point in forward direc-
tion until the seat releases. Now the
seat can be taken from the frame

Storing or transporting the frame

· If you wish to store or transport the sitter

frame, you must first remove the seat.

· To make the sitter more compact for

storage you can disassemble the frame
by removing the left and the right-hand
tubes. You can do this by pressing the
side-mounted metal push buttons and
pulling the left and right-hand tube out
of the lower frame.

Adjusting the seat (3)

· The back and the footrests can be ad-

justed to a range of positions. The seat

depth is also adjustable.

Adjusting the back rest

· In order to adjust the back rest, the

press button on the right side of the
seat should be pressed and at the same
time the backrest should be moved into
the desired position.

· The backrest can be moved forward

without pressing the mentioned
button.

Adjusting the footrest

· To adjust the footrest, press the buttons

at the outside of the footrest and move
the footrest in the desired position.

Adjusting the seat depth

·  Release the Velcro strips that are loca-
  ted at the rear of the seat.
·  To adjust the seat depth, pull the small

plastic  parts  at  the  back  of  the  seat
(L+R)  outward  and  move  the  backrest
to  the  front  or  the  back  to  make  the
seat depth smaller or bigger.

· To fix the seat again, make a downward

movement with the backrest until you
hear a “click”.

· Fix the fabric straps with Velcro again.
! No fabric should get stuck between

the adjusting mechanism, because it
will block the adjusting mechanism.

Seat positions

(4)

· Depending on the age and condition of

your child, you can adjust the position
of the back and the footrests:

- lowest position (4a): This is the appro-

priate position if your child is asleep.
For children up to 15 kg. The blocking
feet are lowered.

- highest position (4b): For children up

to 15 kg. The blocking feet are low-
ered.