MUTOH Viper Extreme, User Manual

Page: 74 / 148

User’s Guide Viper Extreme
CHAPTER 5: Printer menu
74 AP-75330 – Rev. 1.0 – 14/01/09
5.4.1.6 User media menu
Make various settings on user defined media.
In the User media menu, for each setup value of following printing operation, eight settings of "user media 1-
8" can be set.
Notes
When using media other than the recommended media (user media), the following problems may occur:
Media detection error
Oblique, torn, and creased media
Media jams
Decrease in print quality due to blurring, missing, or smudging of ink
End detection error of roll media
Problems caused by using media other than the recommended will void the warranty.
For more information, contact your local MUTOH dealer.
Setup items Parameters Description
User media 1-8
(1/2)
InkDryTime
In order to let the ink for the printing dry, the time between
the end of the print and the beginning of the next print is set.
Refer to ‘InkDry menu’
HeadHeight
Sets the distance (head height) between the print head and
the media.
Refer to ‘Head Height menu’
Vacuum
Makes the setting for the sucking power of the media to the
printing board, to keep the media flat while printing
Refer
to ‘Vacuum menu’
Thickness
Sets the thickness of the media you are using. Refer to
‘Thickness menu’
User media 1-8
(2/2)
Heater
Sets the temperature of the Heater. Refer to ‘Heater
Menu’
Drier
Sets the temperature of the Drier. Refer to ‘Drier Menu’
HStatus
Checks the temperature of Heater and Drier. Refer to
"HStatus Menu"
Dist.Adj
Performs various settings for media feed compensation.
Refer to ‘Media feed compensation menu’