Musway TUNE12, Manual

Page: 8 / 24

8
ENGLISH
CH1 CH3
CH5
CH7 CH9 CH11 CH1 CH3 CH5
L
CH2 CH4 CH6 CH8 CH10 CH12 CH2 CH4 CH6 R
LINE OUTPUT LINE INPUT
AUX
HI.LEVEL AUX
CLIP
SENSITIVITY
CH1-8
LINE.IN
CH1-6
Max Min Max Min Max Min
USB
BT DRC COAXIAL
INPUT
OPTICAL
INPUT
HI-LEVEL INPUT
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 + - + - + - + - + - + - + - + -
POWER
REVERS REM OUT REM IN +12V GND
REM SPK
DIGITAL 12-CHANNEL
SIGNAL PROCESSOR
TUNE 12
TURN ON SEL
DESCRIPTION OF OPERATION
2
USB
This USB input is suited for the connection with a PC/laptop computer to manage the functions of the
MUSWAY DSP software to set-up the DSP functions of the device. The connection is USB 1.1/2.0/3.0
compatible. For downloading the software please visit “www.musway.de/dsp” .
2
BT
This USB input is suited for an external Bluetooth
®
dongle with wireless audio streaming function with/
or adjusting the DSP by an APP through a smart phone/mobile device.
Check the website
“www.musway.de” for more information or ask your car audio retailer.
3
DRC
This input is suited for an external MUSWAY digital remote controller. Check the website “www.mus-
way.de” for more information or ask your car audio retailer.
4
OPTICAL INPUT
The Optical Input accepts PCM stereo signals up to 96 kHz / 24 bit sampling frequency rate. Multi-
channel signals coming from audio/video sources (such as the audio tracks of a film in DVD) can not
be reproduced. Connect a fiber optic cable with a TOSLINK connector.
5
COAXIAL INPUT
The Coaxial Input in S/PDIF format for connecting sources with a digital audio output. The sampling
rate of this input has to be in the range of 32 and 96 kHz. Note: This signal processor can only handle
stereo input signals.
6
HI LEVEL INPUT
Connect here the amplified speaker output by using the enclosed 16 pole multipolar connector. CH1-2
features the Auto Turn-On function through the connection with the speaker outputs of the head unit
7
TURN ON SEL
The device can be turned on/off by using the following methods:
SPK: Slide the switch into position SPK, if you want to turn on/off the device through
the CH1 input channel of the high level speaker inputs and its Auto Turn-On function.
REM: Slide the switch into position REM, if you want to turn on/off the device through the REM IN
and a turn-on signal from head unit/car stereo in low level operation.
NOTE: Power on by REM is recommended. In case if there’s no REM/ACC signal on the vehicle,
turn on/off the device with the source speaker outputs as an alternative solution.
8
4 6
3 5
7 8