Musway TUNE12, Manual

Page: 10 / 24

10
ENGLISH
INITIAL SYSTEM START-UP
BEFORE YOU FIRST USE THE UNIT
When you first use the unit, set the following:
Turning Power On
Setting the Speaker System
Setting the Input Configuration
Audio Adjustment
• Download and save the MUSWAY DSP software before connecting the device to your personal computer.
• Install the device in your vehicle before you connect a computer to it .
• Turn the ignition key to the ACC or ON position.
• Connect a PC/Laptop with the USB terminal of device by using the enclosed USB cable.
• After you have open the DSP software, you can set/adjust all the audio settings on the computer.
• The device is on when the logo on the top lights up in orange. After 10 seconds it becomes operative.
Recommended specifications:
CPU: 1.6 GHz or higher
Memory: 1 GB or higher
HDD:
512 MB or more
available space
Display: 1024×576 or higher
OS:
Microsoft™ Windows XP,
Vista, 7, 8, 10 or higher
DSP software download:
www.musway.de/dsp
Before turning on the sound system, check again carefully the configuration of the cross-
overs , the speakers setup. Wrong type of crossover or inappropriate parameter may cause
permanent damages on the speakers, especially tweeters without passive crossovers.
WARNING
CH1 CH3 CH5 CH7 CH9 CH11 CH1 CH3 CH5 L
CH2 CH4 CH6 CH8 CH10 CH12 CH2 CH4 CH6 R
LINE OUTPUT LINE INPUT AUX
HI.LEVEL AUX
CLIP
SENSITIVITY
CH1-8
LINE.IN
CH1-6
Max Min Max Min Max Min
USB
BT DRC
COAXIAL
INPUT
OPTICAL
INPUT
HI-LEVEL INPUT
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 + - + - + - + - +
- +
- + - + -
POWER
REVERS REM OUT REM IN +12V GND
REM SPK
DIGITAL 12-CHANNEL
SIGNAL PROCESSOR
TUNE 12
TURN ON SEL