7
G
et
tin
g
St
ar
te
d
Before Operation
This section covers signifi cant information about the unit’s general behavior. Please read
the below information carefully.
As turning on the HDD+DVD Recorder, the unit directly enters to DVD mode.
If a disc is already placed on the disc tray, the reocrder will start to load the disc right
after power is turned on. It will be invalid by pressing
HDD/DVD
to switch to HDD
mode or
Source
to change connected source during loading.
If Auto Play is set on, the recorder will start to play the disc or display its menu after
loading.
To switch to HDD mode, please do the following:
If there is no disc placed in the recorder, press
HDD/DVD
on the remote control
to switch to HDD mode.
If there is a disc placed in the recorder, press
Stop
twice to completely stop DVD
playback. Press
HDD/DVD
on the remote control to switch to HDD mode.
When pressing
Stop
for a fi rst time during DVD playback, the recorder turns to
a pre-stop status and memorizes the position where the playback is stopped. To start
play from where the playback has been stopped, press
Play
.
If intending to completely stop DVD playback in order to operate the other functions
in pass-through mode, press
Stop
for a second time following the previous stop
operation.
When recording programs to a DVD+RW or DVD+R disc, after the disc is loaded and its
disc menu is displayed on the screen, press
Record
once to switch the recorder
to record mode. Then press
Source
to select a preferred source for recording. To
start the recording, press
Record
again.
To display the title menu during HDD playback, press
Menu
or
Title
. To
leave the menu, press
Play
.
To return to the title menu during DVD playback, press
Menu
or
Title
.
As
appears on the right top corner of the screen, it indicates that the action is
prohibited or not available.
r
r
r
r
1.
2.
r
r
r
r
r
r
