Mustang GOURMET 4+1, Manual

Page: 18 / 44

18
tighten it onto the connection thread. If the hose is
replaced, it must be secured to the barbecue and
regulator connections with hose clips. Disconnect
the regulator from the cylinder according to the
directions when the barbecue is not in use.
The Barbecue must be operated in a well-ventilated
area. Do not obstruct the flow of combustion air to
the burner when the barbecue is in use. ONLY USE
THIS BARBECUE OUTDOORS.
BEFORE USE, CHECK FOR LEAKS IN THE HOSE AND/
OR CONNECTION THREADS.
Never check for leaks with a naked flame, always
use a soapy water solution.
CHECKING FOR LEAKS
Make 2-3 fluid ounces (6-9 dl) of leak detecting
solution by mixing one part dishwashing liquid with
3 parts water.
Ensure that the control valve is “OFF”.
Connect the regulator to the gas cylinder and ON/
OFF valve to the burner. Ensure that the connec-
tions are secure and then turn the gas ON.
Brush the soapy solution onto the hose and all
joints. If bubbles appear you have a leak, which
must be rectified before use.
Retest after fixing the fault.
Turn the gas OFF at the gas cylinder after testing.
If leakage is detected and cannot be rectified, con-
sult your gas dealer in order to fix the leak.
LIGHTING YOUR BARBECUE
First use
Before cooking for the first time, operate the barbe-
cue for about 15 minutes with the lid closed and the
gas turned on to maximum . This will “heat clean”
the internal parts.
Clean your barbecue after each use. DO NOT use
abrasive or flammable cleaners, as it will damage
the parts of the product and may start a fire. Clean
the barbecue with warm soapy water.
WARNING:
Accessible parts may be very hot. Keep
children away from the hot barbecue at all times
(even when the appliance is cooling down!). Protec-
tive gloves (e.g. oven gloves) should be used when
handling particularly hot components.
Main burner ignition instruction
1. Open the lid of the barbecue before igniting the
burners.
2. Turn all of the knobs clockwise to the OFF posi-
tion (•).
3. Connect the pressure regulator to the liquid gas
cylinder. Turn the gas supply of the pressure regula-
tor to the ON position. Use soapy water to check for
any gas leaks between the liquid gas cylinder and
the pressure regulator.
4. Push and hold down the knob, and then turn it
counter-clockwise until you feel a spring resistance.
Keep the knob in this position for 3-5 seconds to
allow the gas to flow. Turn it counter-clockwise to
“ ” position. Check if the burner has ignited. If the
burner has not ignited, repeat the process.
5. If the burner still won’t ignite, turn the knob to
the OFF position (•), wait about 5 minutes, and
repeat step 4.
6. Move the knob between the and positions to
adjust the temperature.
7. Ignite the other burners by pushing and holding
each corresponding knob and turning the knobs
counter-clockwise to the position. The ignition
unit between the burners will ignite the burners.
Light the burners in order.
8. If the burner won’t ignite, use a match to ignite
the barbecue from the ignition hole in the side of
the barbecue.
9. Turn the barbecue off by turning the valve of the
liquid gas cylinder or the valve of the pressure reg-
ulator to the OFF position, and then turn the knobs
of the barbecue to the OFF (•) position.
Warning! If the burner won’t ignite, turn the knob
(clockwise) to the OFF position and close the valve
of the liquid gas cylinder. Wait 5 minutes before
trying to ignite the barbecue again by following the
instructions.
Side burner ignition instruction
1. Open the lid of the side burner (if delivered) be-
fore igniting.
2. Push and hold down the side burner knob, and
then turn it counter-clockwise until you feel a
spring resistance. Hold the knob in this position for
3-5 seconds to allow the gas to flow, and then turn
it counter-clockwise to “ ” position. Check if the
burner has ignited. If the burner has not ignited,
repeat the process.
3. If the burner still won’t ignite, turn the knob to
the OFF position (•), wait for about 5 minutes, and
repeat step 2.
4. Adjust the temperature by moving the knob be-
tween the and positions.
5. If the side burner won’t ignite, use a match to ig-
nite it. Contact your gas provider to fix the problem.
6. Turn the side burner off by turning the knob
clockwise to the OFF position or, if you have fin-
ished using the barbecue, turn the valve of the
liquid gas cylinder or the valve of the pressure regu-