manualshive.com logo in svg

Mustang Survival MD3183, Owner'S Manual

The Mustang Survival MD3183 life vest is a state-of-the-art personal flotation device designed for extreme safety and comfort. Stay protected on the water with its innovative design and advanced features. Download the free user manual from manualshive.com to learn more about operating and maintaining this high-quality product.

Share
Download
background image

25 

MUSTANG SURVIVAL

/ 

OWNER'S MANUAL

 – MD3181  / MD3183 / MD3184 /

 INFLATABLE PFD

EACH OF THESE DEVICES IS INTENDED TO HELP YOU  
SAVE YOUR OWN LIFE

For your inflatable PFD to function properly, follow these suggestions 
to verify that it fits, floats, and remains in good condition.

1.  Check the single point status indicator before each use.

2.  Get in the habit of re-arming the inflation mechanism right after 

each inflation.

3.  Try your wearable PFD on and adjust it until it fits comfortably in 

and out of the water.

4.   Mark your PFD with your name if you are the only wearer.

5.   Do not alter your PFD. If it doesn’t fit properly, get one that does. 

An altered device is no longer Coast Guard approved.

6.  Your PFD is not intended for use as a fender or kneeling pad.

7.  If your PFD is wet, allow it to dry thoroughly before storing it. 

Store it in a well-ventilated area.

8.  Do not dry your PFD in front of a radiator or other source of 

direct heat.

INFLATABLE PFD SAFETY ACCESSORIES 

MA7214 Re-arm Kit contains 33-gram replacement CO

2

 cylinder 

inflator for models MD3183 and MD3184.

MA3181 Re-arm Kit contains 33-gram replacement CO

2

 cylinder 

inflator for model MD3181.

Summary of Contents for MD3183

































Reviews:

No comments

Related manuals for MD3183

WilliamsRDM Stovetop Firestop STFS PLUS LC User Manual preview
Stovetop Firestop STFS PLUS LC
Brand: WilliamsRDM Pages: 2

Brands by name

Popular brands

Load more brands