9
MUSTANG SURVIVAL
/
OWNER'S MANUAL
– MD3181 / MD3183 / MD3184 /
INFLATABLE PFD
RE-ARMING YOUR PFD
USE
A VALID MUSTANG SURVIVAL RE-ARM KIT FOR THIS PROCEDURE (MA7214 FOR
MODELS MD3183 AND MD3184 AND MA3181 FOR MODEL MD3181). USE OF OTHER
RE-ARM KITS MAY RESULT IN FAILED OR IMPROPER OPERATION AND WILL VOID THE
PRODUCT'S WARRANTY.
1. Place the PFD on a smooth, flat surface and wipe off any water.
Access the inflator by reaching under the cover and pulling it
toward you, turning the cell and cover inside-out to fully expose
the inflator for re-arming. Hold the CO
2
cylinder through the
fabric, using one hand (Fig. 8 for models MD3183 and MD3184;
and Fig. 8a for model MD3181).
2. Insert the metal key between the black locking ring and the
labeled yellow cap. Turn the key counterclockwise (Fig. 9 for
models MD3183 and MD3184, and Fig. 9a for model MD3181).
Locking Ring
Key
FIGURE 9
FIGURE 9A
HAMMAR
Locking Ring Key
HAMMAR
MD3181
MD3183 AND MD3184
FIGURE 8
HAMMA
R
JERK T
O
INFLA
TE
FIGURE 8
FIGURE 8A
MD3153 AND MD3154
MD3151
Locking Ring
Key
