13
MUSTANG SURVIVAL
/
OWNER'S MANUAL
– MD3181 / MD3183 / MD3184 /
INFLATABLE PFD
FIGURE 18
FIGURE 19
FIGURE 20
REPACKING YOUR PFD
If your PFD has been used and/or the inflator replaced, always
inflate through the oral tube and check that it stays inflated at least
overnight. With the cap in the top of the oral tube, gently squeeze the
PFD until all air or gas has been expelled, (Fig. 6, p. 8). Do not wring
or twist the PFD. Put the oral tube cap back in its stowed position on
the oral tube (Fig. 7, p. 8). Let the PFD dry before packing.
BEFORE FOLLOWING THE REPACKING SEQUENCE, BE SURE TO PROPERLY RE-ARM
YOUR INFLATABLE PFD, (SEE RE-ARMING YOUR PFD, P. 9). ENSURE ALL AIR IS
REMOVED BEFORE REPACKING.
1. Lay the PFD on a flat, clean surface
(Fig. 18).
2. Fold side (A) inward along the full length of the dotted line
(Fig. 19). Fold cover (B) over, covering side (A) (Fig. 20).
3. Repeat step 2 with side (C) (Fig. 21), cover (D) (Fig.22).
4.
Fold over the top side (E) (Fig. 23) into thirds, and fold cover (F)
back (Fig. 24).
LAY FLAT
RIGHT SIDE A
RIGHT SIDE B
