11
MUSTANG SURVIVAL
/
OWNER'S MANUAL
– MD3181 / MD3183 / MD3184 /
INFLATABLE PFD
8. Hold the CO
2
cylinder through the fabric of the PFD. Position the
replacement cap with the water inlet valve pointing to the right
and press firmly onto the inflator body and sealing ring (Fig. 15
for models MD3183 and MD3184, and Fig. 16 for model MD3181).
6. Check that the new inflator body indicator is green. Insert the
new inflator body with CO
2
cylinder pointing upward inside the
PFD (Fig. 13). Let the sealing ring rest on the adapter around the
four lugs.
FIGURE 14
FIGURE 14A
Single
Point
Indicator
Water
Inlet
Valve
HAMMAR
JERK T
O
INFLATE
Single Point
Indicator
Expiry Date
FIGURE 12
FIGURE 13
Red Indicator
Trash
Green Indicator
Caution:
Do not turn
the center
shaft
7. Now check the new manual/automatic cap as follows (Fig. 14 for
models MD3183 and MD3184, and Fig. 14a for model MD3181):
• Is the single point status indicator showing green?
• Is the expiry date OK?
If YES
is the answer to both questions, then proceed as follows.
If the answer is
NO to either question, get a new cap.
RED = TRASH
GREEN = GO
MD3183 AND MD3184
MD3181
