Record
Start Recording
Recording Drum/ Percussion Parts
Method 1:
In the recording standby mode, press the [PLAY/
STOP] button, starts recording after pre-count. The LCD displays
corresponding number of measure, and the pre-count sound
cannot be recorded (Set pre-count parameter in the record menu.).
Method 2:
In the recording standby mode (The [REC] keeps
flashing and the [PLAY/ STOP] keeps flashing, the LCD displays
record menu.), if the “Sync/ST: ON”, as striking a pad starting
recording.
Note:
Click sound cannot be recorded.
While recording, the tempo value cannot be changed in real time.
While recording, press [REC] button to enter rehearsing statement,
you can only hear what you are playing (In the rehearsal mode, the
[REC] keeps flashing and the [PLAY/ STOP] keeps lighting, the
LCD displays “-Rehearsal”), press the [REC] button again back to
recording mode.
Recording Part1~Part5
1. Link MIDI keyboard (or other MIDI equipment such as comput-
er) to the MIDI IN port of the digital drum.
2. Press [PLAY/STOP] button to start recording after leading
measure. The LCD displays corresponding number of measure,
and the pre-count sound cannot be recorded.
Note:
1. We recommend you setting “SYNC=ON” (Refer to Record
setting.).
2. If you use Note On event of MIDI IN to sync start recording, then
only initial PAN, VOL, PITCH, and REVERB LEVEL information
can be recorded.
3. At the same time, only 1 drum or percussion part can be
recorded at one time, other parts (part1~part5) can be recorded
simultaneously.
Stop Recording
In the state of recording, press the [PLAY/ STOP] button to stop
recording, indicators of [REC] and [PLAY/ STOP] buttons go out.
Play Back Recordings
After recording stops, it would enter SONG Mode automatically;
press [PLAY/STOP] button to playback the song you just recorded.
Recording Based on Preset Song
1.
Select a preset song (for example 012), press [REC] button,
also need to copy this preset song to a user song, the system
will automatically select a empty user song (or select the first
user song).
2.
Use [+]/ [-] button to select an available song.
3.
Press the [SAVE/ ENTER] button to confirm your selection.
4.
The system temporally display rename interface, the LCD
displays “Save Ok!” after save successfully.
26
Record
C
M
Y
CM
MY
CY
CMY
K
Fame_DD-one_ Manual_003_150727.pdf 26 2015/8/7 12:00:48
