Setup
Caution!
To prevent electric shock and damage to drum module or other devices, always turn off the
power of all devices before making any connections.
Connecting the Pads and Pedals
Using the provided cables, connect each Trigger input jack on the rear panel of the module, and make sure each pad is
connected to its corresponding Trigger input jack.
Note:
Both ends of provided cables are printed corresponding name of connected interfaces of drum module, as long as you
connect each pad corresponding to right sign of drum module (Refer to each sign name showed below.), it ‘s easy to
complete all connections.
7
Note:
For details on assembling the drum stand, attaching the digital drum and connecting pads, refer to the Installation
Manual description.
Simulation Hi-Hat
Drum Module
Crash1
Snare
Kick
Tom 1
Tom 2
Tom 3
Tom 4
Hi-Hat Control Pedal
C
M
Y
CM
MY
CY
CMY
K
Fame_DD-one_ Manual_003_150727.pdf 7 2015/8/7 12:00:46
