DIMENSIONS
7-5/16 in.
(186 mm)
Reset Knob
1 NPT
(2 places)
3-3/32 in.
(79 mm)
Manual Trip
Knob
1/2 NPT Conduit
Connection
5-1/2 in. (140 mm)
1/4 NPT
Vent and Plug
6-9/16 in.
(167 mm)
Breather/Vent
1/16 in. (2 mm)
1 NPT
(2 places)
3-3/32 in.
(79 mm)
1/4 in. (6 mm) tube connection; control
pressure 3 psi (21 kPa) [0.21 bar] minimum,
75 psi (517 kPa) [5.17 bar] maximum.
5-1/2 in. (140 mm)
1/4 NPT
Vent and
Plug
Latch Arm (see
NOTE
)
NOTE:
Thumb operated opening latch (2.5 psi [17 kPa]
[0.17 bar] required to release cocking latch)
9-3/8 in. (238 mm)
4-3/8 in.
(111 mm)
Vent and Plug
1/2 NPT
2 NPT
(2 places)
4-1/4 in.
(108 mm)
10-7/16 in. (265 mm)
Breather Vent
(see
NOTE 1
)
NOTE 1
: Control pressure connection fitting and breather vent fitting can be swapped to convert to vacuum control.
NOTE 2
: Thumb operated opening latch (2.5 psi [17 kPa] [0.17 bar] required to release cocking latch).
6-1/8 in.
(156 mm)
1/4 in. (6 mm)
connection;
control pressure
3 psi (21 kPa)
[0.21 bar] minimum,
80 psi (552 kPa)
[5.52 bar] maximum
(see
NOTE 1
)
Latch Arm (see
NOTE 2
)
M2582
M5180-P
Magnetic Switch Adapters
65700053
(was 65020126)
; 65700054
(was 65020127)
; 65700055
(was 65020155)
M2582-P
CAUTION:
THE ARROW ON THE SIDE OF THE FUEL VALVE
MUST
POINT TO THE CORRECT DIRECTION OF THE
FLOW, FROM FUEL SOURCE TO THE ENGINE. APPLY PIPE DOPE
ONLY
TO FUEL PIPE,
NOT
TO THE FUEL VALVE.
2-7/16 in.
(62 mm)
2-5/8 in. (67 mm)
1-15/32 in.
(37 mm)
31/32 in.
(25 mm)
1-23/32 in.
(44 mm)
2-5/16 in. (59 mm)
15/32 in.
(12 mm)
Panel Mount screws
10-24 N.C. x
5/16 in. (8 mm) long
Terminal screws
8-32 N.C. x
1/4 in. (6 mm) long
GND ALT1
ALT2
SW
3/8 in.
(10 mm)
Installation M-7980N page 3 of 12
1-800-548-1191 - http://www.partdeal.com - [email protected]
