background image

CONTROL SYSTEMS & SERVICES DIVISION

P.O. Box 1819; Rosenberg, Texas 77471; USA
+1 281 633 4500  

fax

+1 281 633 4588 

e-mail

[email protected]

MURPHY DE MEXICO, S.A. DE C.V.

Blvd. Antonio Rocha Cordero 300, Fracción del Aguaje 
San Luis Potosí, S.L.P.; México 78384 
+52 444 8206264  

fax

+52 444 8206336

Villahermosa 52 993 3162117

e-mail

[email protected]

www.murphymex.com.mx

FRANK W. MURPHY, LTD.

Church Rd.; Laverstock, Salisbury SP1 1QZ; U.K.
+44 1722 410055  

fax

+44 1722 410088  

e-mail

[email protected]

www.fwmurphy.co.uk

MURPHY SWITCH OF CALIFORNIA

41343 12th Street West
Palmdale, California 93551-1442; USA
+1 661 272 4700  

fax

+1 661 947 7570

e-mail

[email protected]

www.murphyswitch.com

In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.

MACQUARRIE CORPORATION

1620 Hume Highway
Campbellfield, Vic 3061; Australia 
+61 3 9358 5555  

fax

+61 3 9358 5558

e-mail

[email protected] 

FW Murphy 

P.O. Box 470248
Tulsa, Oklahoma 74147 USA 
+1 918 317 4100 

fax

+1 918 317 4266  

e-mail 

[email protected]  

www.fwmurphy.com

R

E

G ISTERE

D

USA–ISO 9001:2000 FM 28221

UK–ISO 9001:2000 FM 29422

Printed in U.S.A.  

0966106

M2582

M5081

M5081FS

M5081FS Coil Assembly

12 VDC

24 VDC

Latch Block Assembly

Latch block assembly

Latch block switch and coil assembly

Latch block switch and mounting bracket assembly

Coil Assembly

Battery

CD Ignition

Magneto Ignition

55000128

55000129

55000094

------------

55000096

55000097

55000137

---------------

---------------

---------------

55000102

------------

55000102

------------

5500148

------------

55000154

------------

55000095

------------

------------

55000074

------------

55000118

------------

------------

55000196

------------

------------

------------

------------

------------

------------

------------

------------

------------

------------

55000158

55000159

------------

------------

------------

------------

55000126

55000127

55000080

------------

------------

------------

------------

------------

------------

------------

------------

------------

SERVICE PARTS

M2582-P

M5180-P

Handle and Latch Kit

Handle and latch kit

Handle kit

Manual DIsconnect Assembly

55000098

55000072

55000160

---------------

---------------

Snap Switch Assembly

------------

55000138

55000138

---------------

---------------

Close/Open Indicator Assembly

55000093

55000075

55000135

55000147

55000135

Stem and Seat Kit

55000146

55000131

55000161

55000150

55000155

Top Works Complete Valve Less Body and Vent

55000143

55000132

55000132

65700053

65700053

------------

65010065

------------

------------

------------

65700054

65700054

65700055

65700055

55000143

55000132

Vent Bushing Assembly

------------

------------

------------

55000184

55000153

Diaphragm Assembly

------------

------------

------------

------------

------------

------------

------------

------------

------------

------------

------------

------------

00007908

55050420

Pilot Diaphragm

Single/Dual ign. – negative ground up to 240 VDC

Single/Dual ign. – positive ground up to 450 VDC

Single/Dual ign. – negative ground up to 450 VDC

Diode Package for Dual Magneto Ignitions

Magnetic Switch Adapter for CD Ignitions

SPECIFICATIONS

Valve Body:

Sandcast aluminum, painted red (corrosion resistance);

Optional cast steel available for M5081 and M5081FS models only.

Valve Seat:

Buna-N

Maximum Valve Inlet Pressure:

• M2582/M2582-P: 

80 psi (552 kPa) [5.52 bar]

• M5081/M5081FS/ M5180-P: 

100 psi (689 kPa) [6.89]

Maximum Control Pressure (Pneumatic Models):

• M2582-P: 

75 psi (517 kPa) [5.17 bar]

• M5180-P: 

80 psi (552 kPa) [5.52 bar]

Snap-switch:

M2582: 

One SPDT, 5 A @ 480 VAC

M5081, and M5081FS:

Two SPDT, 5 A @ 480 VAC

Wiring:

M2582: 

Wire leads; 

M5081, and M5081FS: 

Terminal blocks

NOTE:

All aluminum versions of the M5081 Series Fuel Valve carry

Canadian Registartion Number OC1476.2.

Coil Rating:

Intermittent duty; coil type must match power source; 

• CD ignition coil resistance: 

72 

CD ignition primary voltage:

1.38 to 3.8 A 

• M5081FS: Energized to Run (continuous-duty coil) coil resistance:

12 V model:

33 

24 V model:

136 

• Magneto ignition coil resistance:

0.5 

Magneto primary voltage: 

1 to 5 A

• Battery coil resistance : 

12 or 24 VDC:

1.2 to 2.4 A

Laboratory Approval:

CSA listed for Class I, Groups C and D

Hazardous Locations. 5 amps maximum; intermittent duty; models
M5081 and M5081-CD engine ignition powered, and model M5081-B, 12
or 24 VAC or VDC; switch contacts rated 5 A @ 480 VAC maximum.
Maximum pressure 100 psi (689 kPa) [6.89 bar].

Installation M-7980N page 12 of 12

Warranty

A limited warranty on materials and workmanship is given with this FW Murphy product. 

A copy of the warranty may be viewed or printed by going to www.fwmurphy.com/support/warranty.htm

1-800-548-1191 - http://www.partdeal.com - [email protected]

Summary of Contents for M5081FS













Reviews: