Page 13 of 30
Call the AVPro Team at –North America 877-886-5112 Interna1-605-274-6055
Frequently Asked Questions
How do I control the Prisma?
Option 1 – Use the included remote IR remote control. You have access to stored LUTs and
PrismaVue adjustment.
Option 2 - The Prisma uses a network connection for setup and advanced control including loading
of LUTs and assigning LUTs to the IR Remote. It can either be plugged in to a standard 10/100
Ethernet network, or can be connected directly to a computer with an Ethernet cable. The Prisma
will obtain a network address automatically using DHCP, or if there is no DHCP server available, it
will use a 169.x.x.x self-assigned address. This is compatible with the method most computers use
to assign network addresses and should be adequate for most users.
The Prisma announces its name on the network using both NetBIOS and mDNS. This means that
you can access the Prisma from your computer's browser as http://prisma.local on a
Mac/iPhone/iPad (or a windows computer with iTunes) or using http://prisma on a Windows
computer.
When you connect your browser to the Prisma, you will be presented with its control panel. This
panel will allow you to select 3D Tables, adjust the PrismaVue parameters, and make other
changes to the Prisma.
How do I install my own 3D LUTs?
Open the Prisma WebOS, and select the "Cube LUT" panel. Use the file selection and upload to
copy the LUT file to the Prisma's internal storage. Once the table has been copied to the Prisma, it
can be selected with the Select Table control.
