Murex Tradestig AC 220, Instruction Manual And Spare Parts List

Page: 19 / 48

-- 19 --
bt38m2ea
To leave hidden functions, press for 5 seconds.
Tradestig AC 220
Function Settings
A = gas pre--flow 0 -- 5 s
b = slope up 0 -- 9.9
C = metric/inch 0 = inch, 1 = mm
l = min current 0 -- 99%
Tradestig AC 220a
Function Settings
A = gas pre--flow 0 -- 5 s
b = micro pulse 0 = OFF; 1 = ON
I = min current 0 -- 99%
Gas pre--flow
This controls the time during which shielding gas flows before the arc is struck.
Micro pulse
In order to select micro pulse, the machine must be in the pulsed current function
. The value for pulse time and background current is normally 0.01 – 2.50
seconds. By using the micro pulse, the time can go down to 0.001 seconds. When
the micro pulse function is active, times that are shorter than 0.25 seconds are
shown in the display without decimal points.
Min current
Used to set the minimum current for the remote control T1 Foot CAN.
If the max current is 100 A and the min current is to be 50 A, set the concealed
function min current to 50%.
If the max current is 100 A and the min current is to be 90 A, set the min current to
90%.