Muratec MFX-2550 Guide, User Manual

Page: 310 / 327

1
2
3
4
5
6
7
Device Settings
Specifying Default Settings 7-45
Press [Close].
7
To continue to change other default values, repeat steps 4 to 7 of the operation.
„
List of Default E-mail Settings
Function Description Settings
Reference
page
FileFormat This sets the default file
format used when a scanned
document is saved. In the
default settings for PDF
w/ Password, you can
set the encryption level
and restrictions with a
permissions password.
Note
If you have changed the file
format in the default scanner
settings, that setting is also
changed.
(See page 7-42.)
Mono
TIFF
PDF
PDF w/ Password
Color
JPEG
PDF
PDF w/ Password
PDF w/ Password
Encryption Level: Low (40-bit RC4),
High (128-bit RC4),
High (128-bit AES)
Printing: Allowed, Not allowed
Editing: Allowed, Not allowed
Copying: Allowed, Not allowed
2-30
Batch Scan Set the default batch scan
setting.
ON
OFF 2-27
Note
Underlined values are the default settings specified at the time of shipment. •
For details on these settings, refer to “Setting Example”. • (See page 7-43.)
„
List of Default Internet Fax Settings
Function Description Settings
Reference
page
FileFormat This sets the default file format used when a transmitting data
via Internet Fax.
TIFF-S: The simple mode TIFF format. Documents are all
converted to A4 size, 200 dpi for transmission.
TIFF: The full mode TIFF format. Documents are
transmitted with the document size and resolution
set when scanning.
PDF: Documents are transmitted in the PDF format.
TIFF-S
TIFF
PDF 4-77
Batch Tx Set the default batch transmission setting. ON
OFF 4-76
Note
Underlined values are the default settings specified at the time of shipment. •
For details on these settings, refer to “Setting Example”. • (See page 7-43.)