Muratec F-116 User Manual Download Page 22 | Manualshive

Page: 22 / 81

background image

Introduction

_ 21

Understanding the Status LED

The color of the status LED indicates the machine's current status.

Muratec

does not recommend using non-genuine

Muratec

toner cartridge

s

such as refilled or remanufactured.

Muratec

cannot guarantee non-genuine

Muratec

toner cartridge's quality. Service or repair required as a result of

using non-genuine

Muratec

toner cartridges will not be covered under the machine warranty.

Check the message on the display. Follow the instructions in the message or refer to troubleshooting part (See
"Understanding display messages" on page 59). If the problem persists, call for service.

Power LED

The power LED indicates the machine's on or off.

Introducing the useful button

Menu button

When you want to know the machine status and set your machine to use an advanced feature, click

Menu

button

(See "Machine status and advanced feature" on page 42).

Turning on the machine

1.

Plug in the power cord.

2.

Press

(power) on the control panel.

If you want to turn the power off, press this button.

STATUS

DESCRIPTION

Off

•

The machine is off-line.

•

The machine is in power saver mode. When data is received, or any button is pressed,
it switches to on-line automatically.

Green:
Online
(

)

Blinking

When the backlight blinks rapidly, the machine is printing data.

On

The machine is on-line and can be used.

Red:
Error

(

)

Blinking

•

A minor error has occurred and the machine is waiting for the error to be cleared. Check
the display message. When the problem is cleared, the machine resumes.

•

Small amount of toner is left in the cartridge. The estimated cartridge life

a

of toner is

close. Prepare a new cartridge for replacement. You may temporarily increase the
printing quality by redistributing the toner (See "Redistributing toner" on page 53).

a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of

print-outs and is designed pursuant to ISO/IEC 19752. The number of pages may be affected by operating
environment, printing interval, media type, and media size. Some amount of toner may remain in the cartridge even
when

End of life Replace new cart

appears and the printer stops printing

On

•

A toner cartridge has almost reached its estimated cartridge life

. It is recommended to

replace the toner cartridge (See "Replacing the toner cartridge" on page 68).

•

A paper jam has occurred (See "Clearing paper jams" on page 56).

•

The cover is opened. Close the cover.

•

There is no paper in the tray. Load paper in the tray.

•

The machine has stopped due to a major error. Check the display message (See
"Understanding display messages" on page 59).

STATUS

DESCRIPTION

Off

The machine is turned off.

On

•

The machine is in ready mode.

•

The machine is in power on.

«
...
20
21
22
23
24
...
»

Summary of Contents for F-116


















































































Reviews:

No comments

Related manuals for F-116

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 341

Brand: Samsung Pages: 8

CLX2160N - Color Laser - All-in-One

Brand: Samsung Pages: 118

CLX 3160FN - Color Laser - All-in-One

Brand: Samsung Pages: 142

CLP-770ND - Color Laser Printer

Brand: Samsung Pages: 2

CLP 610ND - Color Laser Printer

Brand: Samsung Pages: 114

Brand: Samsung Pages: 6

Brand: Samsung Pages: 15

CLP 600N - Color Laser Printer

Brand: Samsung Pages: 227

CLP 600N - Color Laser Printer

Brand: Samsung Pages: 118

CLP 300N - Network-ready Color Laser Printer

Brand: Samsung Pages: 94

CJX-2000FW Series

Brand: Samsung Pages: 2

4116 - SCX B/W Laser

Brand: Samsung Pages: 205

3561ND - B/W Laser Printer

Brand: Samsung Pages: 252

3561ND - B/W Laser Printer

Brand: Samsung Pages: 127

Brand: Samsung Pages: 314

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands