Muratec F-116 User Manual Download Page 69

Page: 69 / 81

Supplies and accessories

_ 68

To purchase maintenance parts, contact

your local Muratec dealer

Replacing maintenance parts can be performed only by an authorized

Muratec

dealer

The warranty does not cover the replacement of any maintenance parts after their lifespan.

Replacing the toner cartridge

Click this link to open an animation about replacing a toner cartridge.

When a toner cartridge has reached its estimated cartridge life:

•

End of life Replace new cart

appears on the display.

•

The machine stops printing. Incoming faxes are saved in memory.

At this stage, the toner cartridge needs to be replaced. Check the type of the toner cartridge for your machine (See
"Available supplies" on page 67).

Open the front door.

Pull the toner cartridge out.

Remove the new toner cartridge out of its package.

Remove the paper protecting the toner cartridge by pulling the packing tape.

PARTS

AVERAGE YIELD

a. It will be affected by media type, media size and job complexity.

PART NAME

Document feeder rubber pad

Approx. 10,000 pages

White roller

Approx. 50,000 pages

Fuser unit

Approx. 50,000 pages

Pickup roller

Approx. 50,000 pages

Cassette pad unit

Approx. 50,000 pages

Summary of Contents for F-116


















































































Search results

Summary of Contents for F-116

Reviews:

Related manuals for F-116

Brands by name

Popular brands

Muratec F-116, User Manual

Search results

Summary of Contents for F-116

Reviews:

Related manuals for F-116

Brands by name

Popular brands