16 (17)
Murata Electronics Oy
Assembly Instructions for Murata's SCC1000 series
TN82
www.murata.com
Rev. 2.0
Figure 12. Tool head is carefully pressed around component and kept in this position for few
seconds.
Figure 13. Immediately after solder melting, component is lifted.
Remove the solder from the PCB using either a solder vacuum or solder braid making sure to clean
the area of solder thoroughly.
Figure 14. Soldering iron and solder braid used for solder removal.
Note that the performance and the reliability of the reworked component may have
decreased due to the rework operation! Murata does not recommend rework.
16
SCC1xx0_1640-21648-0004-E-0519
